62, Armeyskaya st.
Novopolotsk, Borovuha-1
Republic of Belarus

Platinum resistive temperature transducer. Design2 (for measuring outdoor temperature)


ТThis temperature transducer is applied for outdoor temperature measurement in systems of control and automation regulation of different purpose.


The construction of the temperature transducer casing makes it possible to mount it immediately to the wall or other surface with screws, woodscrews and fastening meanings.

The leaden seal is fixed through a lid opening.


The temperature transducer represents a phenoplastic casing with an unscrewing lid, a protection tube of stainless steel and a gland entry for a cable. A sensing element is settled in a protection sleeve.

Electrical connection of the sensing element with screws for an external cableconnection is made corresponding to 2-wire, 3-wire or 4-wire circuit (the temperature transducers corresponding to class A with 2-wire circuit are not made)


Connecting with external devices is made with the help of the appropriate section cable and the amount of wires recommended in the cicuit.

The cable connects to the circuit with the help of screws and nuts.

Technical Features

Measuring temperature range,°С from minus 50 to plus 180
Mounting part length, mm 60; 80
Wiring diagram (circuit) 2-wire; 3-wire; 4-wire; 2-x 2-wire
Class АА, А, В (GOST 6651)
Thermal response time, no more than, s 30
Fastening in-situ
Protective fitting, mm ∅6; ∅8
Recalibration interval, years 4

Connecting Diagram of the sensing Elements

The Temperature Transducer Design Examples

Design ∅D, mm Lраб, mm Fastening NSH Class Circuit tраб,°С
ТСП-Н 6 60 in-situ Pt100 В 2-wire -50...+180
ТСП-Н 6 80 in-situ Pt100 А 4-wire -50...+180
ТСП-Н 8 80 in-situ Pt500 В 2-wire -50..+180
ТСП-Н 8 60 in-situ Pt500 В 3-wire -50.. +180
ТСП-Н 8 80 in-situ Pt500 А 4-wire -50..+180
if you want to order not mentioned designs you should follow technical features of resistive temperature transducer TSP-N.