+375 (214)
intep@tut.by
62, Armeyskaya st.
Novopolotsk
Republic of Belarus

Copper resistive temperature transducer for measuring outdoor temperature. Design 2 (wall-mounted temperature transducer)

Usage

This temperature transducer is applied for outside air temperature measurement in systems of control and automatic regulation of different purpose.

The temperature transducer is calibrated in accordance with GOST 8.461.

Construction

The temperature transducer represents a phenoplastic casing with an unscrewing lid, a protection tube of stainless steel and a gland entry for a cable. A sensing element is settled in a protection sleeve.

An electrical connection of a sensing element with screws for an external cable connection is made corresponding to 2-wire or 3-wire circuit.

Installation

The construction of a temperature transducer casing makes it possible to mount it immediately to the wall or other surface with the help of screws, woodscrews and other fastening meanings.

The leaden seal is fixed through a lid opening.

Technical Features

NSH 10М; 50М; 100М
Measuring temperature range,°С minus 50 plus 100; minus 50 plus 160
α, °С-1 0,00428
Mounting part length, mm 60; 80
Wiring diagram (circuit) 2-wire; 3-wire;
Class В or С
Thermal response time, no more than, s 60
Fastening in-situ
Protective fitting, mm ∅6; ∅8
Recalibration interval, years 2

Connecting

Connecting with external devices is made with the help of the appropriate section cable and the amount of wires recommended in the circuit.

The cable connects to the circuit with the help of screws and nuts.

Connecting Diagram of the Sensing Elements

Design Examples

Design ∅D, mm Lраб, mm Fastening NSH Class α, °С-1 Circuit tраб,°С
ТСМ-Н 2.1.19.00.8.1.2 6 60 in-situ 100М В 0,00428 2-wire -50...+160
ТСМ-Н 2.1.01.00.10.2.2 6 80 in-situ 50М С 0,00428 3-wire -50...+160
ТСМ-Н 2.2.01.00.7.1.3 8 80 in-situ 50М В 0,00428 2-wire -50...+100
ТСМ-Н 2.2.19.00.11.2.3 8 60 in-situ 100М C 0,00428 3-wire -50..+100
ТСМ-Н 2.2.01.00.8.1.2 8 80 in-situ 100М B 0,00428 2-wire -50..+160
If you want to order not mentioned design you should follow the technical features and ordering diagrams of the resistive temperature transducer ТСМ-Н.